Sony RX0II: Is it a better drone camera than the GoPro 10?
In 2019, Sony revealed their new GoPro-style action camera with a 1-inch image sensor. As its name suggests, the Sony RX0 II is the second version of the original RX0 camera that was first released in 2017. The second-generation RX0 principally adds 4K video recording with full pixel readout and no pixel binning, in-body electronic video stabilization, a tilting...
ExpressLRS Recovery Dongle (FTDI USB to TTL)
BetaFPV was among the first drone brands that joined the ExpressLRS team by adopting their high-performance Open Source Radio Control Link. The ELRS Recovery Dongle comes in help for those who brick their radio receiver when failed in updating or flash firmware by using the UART port instead of WIFI.
In a nutshell, the BetaFPV ExpressLRS Recovery Dongle is an...
BetaFPV LiteRadio 1: Cheap Drone Radio Transmitter
The BetaFPV LiteRadio 1 is a go-to starter radio transmitter for younger ones to join the FPV hobby. LR1 is affordable and perfect for smaller hands. Young adults and children can hold it with comfort. BetaFPV includes two types of sticks end with their new LiteRadio 1 remote controller. While the 10mm versions are perfect for thumb controls, the 16mm...
Foxeer Foxwhoop 25: From frame kit to flying CineWhoop
The Foxwhoop25 is advertised with the 'Unbreakable drone' headline. Foxeer even promises a lifetime warranty for the protection guard. Some dude on YouTube did a car-crushing test. Being strong and slightly flexible at the same time passed the torture. Of course, this does not mean, that if you fly at full speed in a concrete wall nothing bad will...
SpeedyBee F745 35A Wireless AIO flight controller
SpeedyBee F745 35A BLS claims to be the world's first AIO flight controller with built-in wireless connectivity (Bluetooth and WiFi). It allows changing everything right on the flight field using your mobile phone. You can configure a new radio receiver, motor layout, PIDs, and other things.
The flight controller measures 36.5x36.5x7 and it has a 25.5x25.5 mounting pattern. Weighting just...
Foxeer Reaper Extreme 2.5W VTx: Insane FPV Power!
Foxeer recently announced a new analog 5.8G VTX with a maximum broadcast power of 2.5W. Yes, you read that correctly, 2500mW. For sure, the Foxeer Reaper Extreme is intended for ultra-long range FPV flights. The FPV transmitter measures 36x27.5x8mm and weighs 13 grams. It comes with a metal body for good heat disipation.
The Foxeer Reaper Extreme can be powered...
Mjolnir Pro (V3) Antenna upgrade for DJI FPV Goggles
Maple Wireless' new Mjolnir Pro (V3) antenna system is intended to improve the DJI FPV Goggles V2 range over using the stock antennas. The system can be easily installed on the front of the headset without any internal modification.
Using mixed polarization and high-gain antennas the Mjolnir Pro promise a wide receiving range and reduces the signal loss caused by...
CYCLONE Nano 2400RX ExpressLRS radio receiver
The CYCLONE Nano2400RX ELRS receiver has a power amplifier (PA+LNA), so it has a 100mW telemetry output and better sensitivity at longer distances. It adopts the IPEX1 generation antenna base and cooperates with an external dipole T-type antenna.
The Nano 2400RX module measures just 11x18x3mm and weighs only 3 grams. It features an IPEX1 antenna plug and comes with a...
FrSky Tandem X20HD: The Ultimate Drone Transmitter
FrSky's high-end X20 transmitter series has 3 versions: Standard, S and HD. The X20HD has a built-in integrated FPV screen (800x600) supporting 720p@60FPS video quality, removing the need for a standalone FPV screen. When combining the HD 720p 60FPS video with near 0ms low latency digital video transmission technology, the X20 HD radio will provide more enjoyment and confidence...
Runcam Thumb Pro: 16gram 4K drone camera
RunCam, one of the most popular drone camera manufacturers, announced their new Thumb Pro camera weighing only 16 grams and comes with UHD recording. The Runcam Thumb Pro is suitable for almost any size of CineWhoop and other kinds of FPV drones. It can record 4K@30fps or 2.7K@60fps videos (up to 60mbps).
As it is intended to be installed on...
ELEGOO NEPTUNE 3: Features, Specs & price
The new ELEGOO NEPTUNE 3 provides all the available features in a low-budget FDM 3D printer. Since it is designed for beginners, it is easy to assemble, and everything is included for a quick start. With its 220*220*280mm build volume and a price of just $210, the third-generation Neptun can compete with most filament 3D printers in its market...