HGLRC Herme ExpressLRS: ELRS TX/RX (900MHz/2.4GHz)
After Happymodel and BetaFPV, HGLRC also announced their first ExpressLRS enabled radio system. Like its contenders, the Herme ExpressLRS also has 900Mhz and 2.4GHz versions. ExpressLRS (ELRS) is an open-source RC link for various applications, including drone communications. ELRS uses LoRa modulation with strong anti-interference technology to achieve long-range transmission with low power usage.
HGLRC claims that the Herme ExpressLRS...
ELEGOO MARS 2 PRO review: My first 3D printer
I think there is no drone pilot that at least once didn't need urgently a 3D printed part or accessory. No one can contest how convenient (fast and cost-effective) is to make your own camera mount in the comfort of your own garage instead of ordering on eBay. The ELEGOO MARS 2 PRO is the first-ever 3D printer I...
HGLRC Zeus25 AIO review: F722 Flight Controller + 25A ESC
The HGLRC Zeus25 AIO flight controller is full of features, including a high-performance STM32F722 processor, 25A BL32 ESC, OSD, 4x UART, 10V BEC, easy soldering layout with large pads, and much more.
Zeus25 AIO supports PPM (FlySky), Serial RX (including FrSky, S.BUS, DSMX, etc.), and ExpressLRS (RX/TX) radio receivers. It has dedicated pads for Caddx Vista or DJI Air Unit...
BetaFPV ExpressLRS review: High Performance drone Radio Link
Starting with July 2021, BetaFPV introduced a new product line based on LoRa powered ExpressLRS radio communication. Their offer ranges from radio receivers and transmitters to flight controllers. You can opt from 2.4GHz, 915 MHZ, or 868 MHz systems according to your needs and RF local regulations. While 900MHz systems allow longer-range and better penetration (for Bando - flying...
Zhiyun Weebill 2 review: Powerhouse gimbal for smooth videos
The Weebill 2 is Zhiyun's newest camera stabilization system with a distinguished design and a flip-out color LCD. With 3.3Kg (7.3 lbs) payload, it is suitable for full-frame Mirrorless cameras and DSLR cameras. In addition to 3-axis stabilization, the Weebill 2 gimbal connects to a wide range of cinema cameras and allows varying degrees of control, from start/stop recording...
Insta360 GO 2 Review: Still tiny, but more versatile
The Insta360 GO 2 is a tiny camera that you can mount on almost any size of FPV drone, allowing you to capture high-quality stabilized videos. Insta360 wanted to provide a super-light wearable clip-on camera that allows capturing your every day's best moments with the original GO. It fits into your pocket just like your AirPods. Combined with the...
LDARC EX8 transmitter: S-FHSS D16EU & D16 Non EU
The LDARC EX8 transmitter adopts a similar game-pad style design as the popular Jumper T-Lite. As its name says, it can be configured with up to 8 channels and supports FrSky S-FHSS D16EU and D16 Non-EU radio receivers.
In addition to the two joysticks, on the front panel, it has a 128x64 status LCD and a cool RGB dial button....
Caddx Vista Nebula Nano kit review: Lighter but not better
The CaddxFPV Vista Nebula Nano is the most affordable and probably the lightest HD digital transmission system compatible with the DJI FPV goggles. With a total weight of just 24 grams, it can be installed on compact FPV drones. You can also find it in pre-build systems such as the BetaFPV Pavo30 CineWhoop.
Caddx is the only company licensed by...
Caddx Polar Vista & Air Unit Kit: Starlight Digital HD FPV system
CaddxFPV's new HD digital FPV camera, the 'Polar', can be purchased individually or in a bandle with Vista or Air Unit VTX. Caddx Polar is a digital starlight camera optimized for low-light conditions. With a min illumination of just 0.00003 lux, it is suitable to fly in the dark.
Caddx Polar has a 1/1.8" starlight image sensor and a large...
BETAFPV radio ELRS Series (RX + TX)
BetaFPV is about to release its first radio communication system based on the ExpressLRS opensource project. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance. The BetaFPV ELRS Nano TX module will compatible with many popular remote controllers,...
Zhiyun Weebill 2 gimbal with HD flip-out LCD
Zhiyun has announced its first gimbal with a built-in touchscreen, the WEEBILL 2. The third-generation Weebill stabilizer was specially designed for mainstream DSLR and Mirrorless cameras in the most available lens combinations. With a max payload capacity of 7.3lb, can easily handle a Canon 5D4 with EF 24-70mm F2.8 lens or Sony A7III+FE 24-70mm F2.8 lens.
The WEEBILL-2 gimbal doesn’t...