Foxeer Razer Micro&Mini: Cheap 1200TVL FPV cameras
Foxeer, one of the most popular FPV rig manufacturer just announced two new extremely affordable 1200TVL cameras. While the super small Foxeer Razer Micro is advertised for $17.90, its larger twin-brother the Razer Mini for $19.90. Both FPV cameras features 1200TVL resolution and 1/3" CMOS image sensor.
Featuring wide range of input voltage, both Foxeer Razer cameras can be powered...
MOZA Mini MX2 review: Gimbal with auto phone load
Over the last few years, Gudsen MOZA has steadily improved its smartphone gimbals. The second-generation Mini MX2 continues the trend. It is the first stabilizer with a smart auto-sense phone holder and instant portrait/landscape transition.
In a short time, Gudsen Technology became one of the most active and devoted players in the image stabilization industry. They provide gimbals for a...
HGLRC Zeus25 AIO review: F722 Flight Controller + 25A ESC
The HGLRC Zeus25 AIO flight controller is full of features, including a high-performance STM32F722 processor, 25A BL32 ESC, OSD, 4x UART, 10V BEC, easy soldering layout with large pads, and much more.
Zeus25 AIO supports PPM (FlySky), Serial RX (including FrSky, S.BUS, DSMX, etc.), and ExpressLRS (RX/TX) radio receivers. It has dedicated pads for Caddx Vista or DJI Air Unit...
ZHIYUN WEEBILL 3S gimbal for Mirrorless and DSLR filmmaking
The WEEBILL 3S is ZHIYUN's newest camera stabilization system for professional content creators. Like other gimbals, the WEEBILL 3S provides three-axis stabilization using motors that can counteract the movements of your camera and create automated (or guided) tracking and panning camera movements. Like the CRANE-M 3S, the WEEBILL 3S comes with a 1000 lux light.
The WEEBILL 3S weighs 1,054...
Holybro Kakute H7 V1.3 flight controller for drones and opto-copers
The newly released Holybro Kakute H7 V1.3 flight controller supports 2 to 8S LIPO batteries and is intended for classic four-motor drones and professional octocopters. It has nine PWM outputs (2x4in1ESC and LED), six UART ports (UART2 is used for Bluetooth telemetry), and a dedicated HD digital port for DJI O3 Air Unit and other compatible VTXs.
According to HolyBro,...
Hawkeye Firefly Fortress FPV camera
The Firefly Fortress from Hawkeye is an all-in-one first person view camera solution. The 960TVL camera module is paired with an up to 72CH video transmitter board. According to your needs, you can set 25, 50 or 200 mW transmission power. PIT (low power) mode is also available.
Featuring wide input voltage, the Hawkeye Firefly Fortress camera can be powered...
I’ve been testing the Jumper T14 for 2 weeks – here’s the pros and cons
The Jumper T14 is the company's third radio controller reviewed here on FirstQuadcotper. The T14 is a mid-level transmitter with a built-in 1W ERLS module. It adopts RadioMaster Boxer and TBS Mambo-like form, factor, and layout. Not everything about the T14 is whoa-inducing; it lacks flight mode buttons, and the antenna is not removable for upgrade purposes.
JumperRC released the...
RunCam Swift Mini FPV camera
RunCam Swift Mini camera for FPV racing quadcopters
Although the RunCam Swift Mini is much smaller than its predecessor, it has the same weight (12g). In my opinion RC should also focus to reduce the weight of their FPV cameras. Currently there are on the market AIO VTX cameras that weight only 4 grams.
Thanks to the wide input voltage range, this RC...
MEPS SZ F7 Mini: Small and versatile F722 flight controller
F722 flight controllers like the MEPS SZ F7 Mini find applications across various FPV drone platforms, from racing and freestyle quadcopters to professional aerial cinematography rigs—the precise flight control, advanced features, scalability, and configurability suit novice pilots and seasoned professionals.
The flight controller (FC) is a critical component of an FPV drone responsible for controlling and stabilizing the aircraft during...
LN Motor FS3115 900KV: Cinelifter Motors for 9-10″ FPV drones
The FS3115 900KV brushless motors from LN-Motor are intended for 9 and 10 inch cine-lifter FPV drones. These motors can be used in X4 and X8 configurations, depending on how much payload you expect to install on your drone. Each motor can generate a max thrust of 4kg when equipped with a Genfan 10" propeller or 3.3kg with an...
DJI RS3 and RS3 Pro DSLR cinema gimbals
It looks like 15th June become the official 'Gimbal Day'. Besides Zhiyun, DJI also announced two new Ronin DSLR cinema gimbals. While the DJI RS 3 can support up to 6.6 lbs (3 kg), the RS 3 Pro can support up to 10 lbs (4.5 kg). In order to accommodate larger cameras, the RS3 Pro also has longer arms...