AuroraRC Smooth-R FPV combo kit
AuroraRC's new Pusher-Whoop style 2" FPV drone is sold in a combo pack with a Jumper T-lite transmitter and Hawkeye 3.5" FPV monitor. The kit also includes two pieces of 450mah 3S 80C batteries and a balance LIPO charger.
On the center of the 100m size frame is located the F405 AIO flight controller with integrated 4-in-1 20A ESC. Its...
AuroraRC Funny5 Toothpick style FPV drone
The AuroraRC Funny5 features a Toothpick-style design. The frame kit with all electronic parts and motors weighs just 175grams, excluding the battery. It can be powered from 3s to 6S batteries. The manufactures suggest using 800-1300mAh LIPO packs.
AuroraRC Funny5 adopts a versatile F411AIO Pro flight controller with an integrated 4in1 35A speed controller (ESC). The Caddx Ratel2 camera is...
AuroraRC EGG2 HD: 100mm CineWhoop FPV drone
The AuroraRC EGG2 HD is a 2-inch CineWhoop style FPV drone equipped with Caddx Nebula Nano camera and Caddx Vista digital HD VTX. It features a similar 'Pusher' design to the popular Beta95X V3 drone.
Natively it is compatible with the DJI FPV transmitter. If you prefer a different radio system you can opt for a pre-installed FlySky FS-A8S V2,...
AlfaRC Herbie 112B: 2.5″ Toothpick FPV drone
The AlfaRC Herbie 112B is a 2.5-inch propeller compatible Toothpick style FPV drone. It is built on a 112m size carbon fiber frame with a nylon protective canopy. In the center of the fuselage is located the 3-layer flight stack (ESC, FC, and VTX). The AlfaRC 1103 8000KV motors are paired with 65mm 2-leaf propellers.
AlfaRC opted to equip their...
AuroraRC PachRay3 FPV racing drone
AuroraRC stands that their new PachRay3 FPV drone weighs less than 100 grams without a battery. You can power it with 3S and 4S batteries as well, for best results 500~800mah capacity is suggested.
Its F7 AIO flight controller comes with integrated 25A ESC and BetaFlight OSD. The frontal Caddx Ant camera is paired with high-broadcast power 5.8G TBS UNIFY...
AuroraRC DEMON: Little devil on the sky
The AuroraRC DEMON features CineWhoop style design with devil-like canopy. For good impact resistance, the 100mm size carbon fiber frame comes with a sponge protection ring. Its onboard FPV camera is also well protected by a 3D printed lens-hood. Adopting CADDX Vista HD digital video transmission system, it can be used with DJI FPV goggles.
The lifting power is generated...
Coming soon: AuroraRC MAMFU 153mm CineWhoop
Instead of the usual horizontal orientation, AuroraRC opted to install the DJI Air Unit vertically in their new MAMFU FPV drone. This approach allows narrower fuselage and to load the memory card from the top of the drone.
AuroraRC MAMFU features a 153mm size carbon fiber frame with foam-padded ducted blade protectors. At the end of each arm, there is...
Coming soon: AuroraRC STICK4 ToothPick FPV drone
AuroraRC’s latest FPV race drone features ToothPick style design. The AuroraRC STICK4 is built on a 154 size carbon fiber frame with 5mm thick arms. The F1507 brush-less motors are matched with 4″ 3-leaf propellers. Its F411 AIO flight controller features BetaFlight OSD and integrated 30A ESC.
According to your existing transmitter, besides the PNP package, you can opt for...
Coming soon: AuroraRC Z4 Freestyle 5″ racing quad
The AuroraRC Z4 Freestyle is a complete FPV racing quadcopter nearly ready to fly out of the box. It comes pre-built and configured from the factory. Simply, just add a receiver (PNP version only) and battery and you can be up flying in about 1 hour. According to your existing transmitter, you can opt between FrSky and FlySky radio...
Armor220 FPV drone by AuroraRC: Features & specs
In my opinion, there are no flying gadgets out there more exciting than FPV drones right now. The Armor 220 paired with a compatible FPV goggles is the closest thing to being a bird.
With a starting price of $268, the Armor220 quadcopter its a bit cheaper than its direct competitor, the HOLYBRO KOPIS 1. Both FPV quads are based on the...