BETAFPV LiteRadio 2: One of the cheapest FrSky transmitter
Price for only $50, the BETAFPV LiteRadio 2 is currently the most affordable FrSky compatible 8 channel drone transmitter. It features a similar game controller style design to the Jumper T-Lite. It is available in white and black colors, with a mode2 stick assignment (throttle on left).
The front panel of the BETAFPV LiteRadio 2 remote controller is very clean...
BetaFPV LiteRadio 3 Radio Transmitter (ELRS/FrSky)
BetaFPV's third-generation LiteRadio 3 comes with two radio options (CC2500/FrSky or SX1280/ELRS) and a Nano TX extension bay. It also adopts a similar gamepad style design as its predecessors.
The BetaFPV LiteRadio 3 is powered by an inbuilt 2000mAh battery that allows about 15 hours of working time. When the battery is near empty a blue LED will flash reminding...
BetaFPV ELRS Lite Receiver
After the ELRS Nano RX radio receiver, BetaFPV released today an even smaller ExpressLRS compatible module with a built-in antenna. The ELRS Lite Receiver measures just 10x10mm and weighs only 0.47 grams.
The tiny module is built around an ESP8285 processor and SX1280 LoRa RF CIP that provides 17mW telemetry power. In addition to the four soldering pads (GND, VCC,...
BETAFPV Meteor75 Lite Advanced FPV KIT 2SE
BETAFPV's newly released Meteor75 Advanced FPV KIT is just perfect for some indoor practice. It contains everything you need for a frenetic first-person view flight. The box includes two batteries, a charger, a LiteRadio V2 transmitter, and a VR01 FPV Goggles.
BETAFPV Meteor75 Lite features a Tiny Whoop style design with duct blade protectors. Its tiny 18000KV brushless motors are...
BetaFPV Pavo30: Brushless Pusher CineWhoop
The BetaFPV Pavo30 Whoop drone adopts a pusher design with inverted motors. Despite its small size, it is powerful enough to carry an SMO 4K camera or a Naked GoPro. The newly developed frame promises an unmatched flight experience in its class.
BetaFPV released the Pavo30 drone with two types of FPV systems. While the analog comes with a Caddix...
BETAFPV Flight Controller Series: For 1S-6S FPV drones
Besides the frame and motors, the flight controller (FC) is an essential part of an FPV drone. Flight controllers are the brain of drones, they control the speed of each motor based on the input of various sensors and the pilot's stick movements. BetaFPV has many FCs, including Brushed, Brushless, Standard, AIO, 1S-6S, with/without a built-in receiver, and more....
BETAFPV TWIG ET5 Toothpick 5″ FPV drone
The TWIG ET5 airframe is built for the new generation of FPV racing, it’s one of the lightest 5-inch Toothpick on the market delivering unparalleled handling and speed for every racer. BETAFPV put the most high-end, race-spec components on the TWIG ET5 Toothpick racing drone. It features a versatile F405 Flight Controller and 35A rated BLHeli_32 electronic speed controller...
BETAFPV X-Knight 5” Toothpick FPV drone
BetaFPV's X-Knight claims to be the first sub-250 grams 5" 6S FPV racing drone on the market. Its toothpick style T800 carbon fiber frame weighs just 27 grams. With all the hardware on top, the scale shows only 150 grams, so you still have up to 100g for the battery in order to be compliant with FAA's weight rules.
At...
BetaFPV Pavo30 review: 3″ CineWhoop under 250g
I tested tons of FPV drones in the last few years, but this Pavo30 will be the first with the BetaFPV logo. I like playing with CineWhoops and I wanted to get one in my hand since the first rumors. My BetaFPV Pavo30 review covers initial setup, binding instructions, and flight experience.
Established in February 2017, BetaFPV is a relatively...
BetaFPV HX115 LR Toothpick FPV Drone
BetaFPV's new long-range FPV drone comes equipped with its latest ELRS Series radio system. The HX115 LR is an ultra-light toothpick style 3" quadcopter built on a 126mm size frame. It adopts a single board AIO solution with an integrated F4 flight controller, 12 ESC and ExpressLRS 2.4G receiver. By default, it comes with a 1S LIPO bay (450mAh),...
BetaFPV Pavo360: See The World From A Different Angle
Pavo360, a totally new and unique CineWhoop style 3" FPV drone designed by BETAFPV, aims to provide pilots with a perfect 360° video recording and stable flying. It can be equipped with the ultralight customized Insta360 SMO 360 camera, a balanced body design to guarantee stable flying, a retractable landing gear to protect the cam away from any damages...