Holybro Kopis CineWhoop 2.5″ Pusher

Like many FPV drone manufactures, Holybro also moves from large 5″ freestyle quads to smaller and safer Whooop style drones. The Kopis CineWhoop features a ‘Pusher‘ design with inverted motors. Thanks to this approach the aircraft can be controlled better in flight and the footage are smoother.

The Holybro Kopis CineWhoop comes equipped with the Caddx Nebula Pro Vista Kit HD Digital System. In addition to the onboard camera, thanks to the included 3D printed mount you can install an ultra-light naked 4K GoPro camera.

It is built on a 3K carbon fibre frame with a 105.5mm wheelbase. The nylon Whoop blade guards are foam-padded. According to the advertised specs without a battery weight of around 160grams.

Kopis CineWhoop features and specs

• 105.5mm size 3K carbon fibre frame with foam-padded nylon Whoop duct protectors;
• Pusher design (motors are installed upside-down);
• Kakute F4 V2 Mini Flight Controller;
• Tekko32 F3 4in1 35A mini ESC 4In1;
• T-Motor F1404 3800KV brushless motor with 2.5″ Gemfan D63-5B propellers;
• Caddx Nebula Pro Vista Kit HD Digital System (camera + VTX);
• DJI FPV goggles and remote controller compatible;
• 1000uF RF noise filtering capacitor;
• Under 250 grams with a 4S 850mAh battery.

Holybro CineWhoop main parts specs

Kakute F4 V2 Flight controller specs

• MCU: STM32F405RGT6 32-bit processor;
• IMU: MPU6000 (SPI);
• Barometer: BMP280;
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART);
• 5 hardware UARTS (UART1,3,4, 5, 6);
• 128 Mbit Dataflash chip for Blackbox logging;
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire);
• PPM and PWM receivers are not supported;
• Dimensions: 32x29x6mm;
• Weight: 4.4grams.

Tekko32 35A mini ESC specs

• F3 MCU, double the speed of F051, the MCU works at 108Mhz;
• 32bit ESC with BLHELI32 firmware;
• Supports 3-6S lipo input;
• Default PWM output 96K;
• PWM input, TLM supported;
• Voltage output (VBAT);
• Ext. cap needed for 6s (1000uf 35v for 6s usage.);
• Size:32 x 38 mm;
• Weight: 8grams.

T-Motor F1404 3800KV brushless motor specs

• Item Name: 1404 3800KV 3-4S Brushless Motor;
• Configuration: 9N12P;
• Shaft Diameter: 1.5mm;
• Dimension: 17.9×16.6mm ( 9x9mm, M2 mounting hole);
• Weight: 9.34 grams.