iFlight’s latest 5-inch FPV racing drone features Toothpick style lightweight design. The iFlight TP X5 HD has two power options. While 4S version comes equipped with Xing 2005 2550kv motors, the 6S edition with 1900KV motors. Both variants have NAZGUL 5030 3-leaf propellers.
The Beast F7 AIO flight tower is installed on the center of the 214mm wheelbase carbon fiber frame. The Caddx Nebula Nano camera is right on top of the electronic parts. All components are well protected by a nylon canopy.
While natively it is compatible with DJI FPV transmitters, you can also opt for FrSky R-XSR, XM+, or TBS Crossfire radio receivers.
iFlight TP X5 HD drone features and specs
- Toothpick style lightweight airframe (~190 grams) with protective canopy;
- 214mm wheelbase (151 x 151 mm overall size);
- DJI FPV compatible Caddx Nebula Nano Digital HD System;
- Beast F7 AIO flight controller;
- 45A 2-6S BlheliS G-H-30 ESC;
- Xing 2005 2550kv (4S) or 1900kv (6s) brushless motors;
- NAZGUL 5030 5″ 3-leaf propellers;
- Optional FrSky R-XSR, XM+ or TBS Crossfire radio receiver;
- 4S and 4S power versions.
iFlight TP X5 main parts specifications
Flight controller specs
- MCU: BGA-STM32F745
- FC Firmware：IFLIGHT_F745_AIO
- Gyro: MPU6000
- Blackbox: 8Mb Onboard Flash
- BEC output: 5V 2.5A
- Barometer: BMP280
- Connector: Micro-USB
- OSD: AT7456E
- Mounting pattern: 25.5*25.5mm φ3mm
- Dimensions: 32.5*32.5mm
- Weight: 8.5grams.
ESC specs
- Uarts: 5
- Current Sensor: Yes
- Input: 2-6S LIPO
- Current scale: 200
- Constant: 45A / Burst: 50A
- BLHeli: BLHeli-S
- Telemetry: no
- ESC Firmware: BlheliS G-H-30
- Mounting pattern: 25.5*25.5mm/Φ3mm
- Dimensions: 32.5*32.5mm
iFlight TP X5 frame kit specs
- Wheelbase: 214mm
- Main body dimension: 151*151mm
- Arm thickness: 4mm
- Bottom plate thickness: 2mm
- Top plate thickness: 2mm
- Middle Plate thickness: 2.5mm
- TPU Camera plate
- FC: 25.5*25.5mm/20*20mm
- FPV Cam: 19mm Micro / 20mm