JJRC X17 Poilt 6K GPS drone under $200
The new JJRC X17 drone comes with some advanced features such as GPS positioning, brushless motors, and a 6K camera with 2-axis gimbal stabilization. The X17 Poilt has a flight time of around 30 minutes and a control range of up to 1000 meters.
It comes with powerful brushless motors that ensure excellent flight performance. According to the advertised technical...
Jumper T-Lite: Gamepad style 16CH drone transmitter
The new Jumper T-Lite 16CH transmitter adopts a similar game controller style to the remote controller packed with the DJI FPV drone. The T-Lite comes with two types of built-in radio modules (CC2500/JP4IN1), Hall Sensor Gimbals, and OpenTX firmware.
Instead of an integrated rechargeable LIPO, or standard AA batteries, Jumper opted to power the T-Lite transmitter with a single 18650...
BetaFPV ELRS Lite Receiver
After the ELRS Nano RX radio receiver, BetaFPV released today an even smaller ExpressLRS compatible module with a built-in antenna. The ELRS Lite Receiver measures just 10x10mm and weighs only 0.47 grams.
The tiny module is built around an ESP8285 processor and SX1280 LoRa RF CIP that provides 17mW telemetry power. In addition to the four soldering pads (GND, VCC,...
Coming soon: Emax EZ Pilot beginner FPV drone
The Emax EZ Pilot is a Tiny Whoop-type brushed drone specially designed for beginner pilots. Thanks to the ducted blade protectors, newbies can practice outdoors and indoors.
According to the manufacturer’s specs, with a fully charged 450mAh battery, you can have about 4 minutes of flight time. A standard 18650-type battery powers both the transmitter and FPV goggles.
EZ Pilot features...
M1 PRO GPS enabled EIS 4K drone
The M1 PRO features a similar camera to the popular F11 4K Pro drone. It also has 2-axis stabilization, PTZ control, and 5GHz WIFI real-time image transmission.
Thanks to the triple positioning system, it is very stable in any environment. The Optical Flow positioning and Air Pressure sensor allows stable hovering indoors, and the GPS positioning outdoor. The dual flight...
Happymodel Crux35 (Analog/Digital): Ultralight 3.5″ FPV drone
After HGLRC, BetaFPV, GepRC, and Diatone, Happymodel also released their ultra-light 3.5" freestyle FPV drone. Like its contenders, the Happymodel Crux35 is available with analogue and digital FPV systems. The Crux35 Analog comes equipped with Caddx ANT camera and OVX303 VTX (up to 300mW broadcast power). The digital edition comes with DJI FPV compatible Caddx Vista Nebula Nano kit.
The...
iFlight iF8 multi-protocol FPV drone controller
Similar to the Jumper T-Lite, the iFlight iF8 also adopts the CC2500 Multi-protocol RF chip. The remote controller is compatible with both, US and Europe RF regulations. Following the included instructions you toggle between FCC and LBT modes.
The front panel is very clean, besides the two control sticks and power switch, there are only 5 status LEDs. It has...
URUAV UZ80: DIY micro Toothpick style FPV drone
The URUAV UZ80 is an affordable DIY FPV drone. The kit includes all the accessories you need to build your micro racing quadcopter. All the electronic parts come with connectors so no soldering required.
The unibody frame has an 80mm wealbase. All the electronic parts including the Runcam Nano 3 FPV camera. Weighs about 20 grams fully assembled but without...
DJI Mini SE vs DJI Mini 2: 3 Key Differences
Back in 2019, DJI released their first drone under 250g, following by the second-generation MINI 2 in 2020 and now they released the third version of their smallest drone named MINI SE. This new ultra-light drone is positioned between the Mini 1 and Mini 2. Despite that many hoped for an obstacle avoidance system, this feature remains available only...
HGLRC Sector X5 and D5 FPV drones for GoPro 10
HGLRC's latest FPV racing drone designed to carry a GoPro 10 camera comes with two frame design options. While the Sector X5 features an X-type frame structure with a wheelbase of 210mm, the Sector D5 has a 'Dead Cat' frame with a 225mm wheelbase. Both variants are equipped with the same Zeus F722 Mini flight controller and Zeus 45A...
Dragonfly KK13 aka JJRC X15: Parrot Anafi clone?
Update: After 6 months of the original Dragonfly’s announcement, a new rebranded model came on the market. The new JJRC X15 Dragonfly 2020 follows the KK13 in every design detail. It is practically the same drone in a different box.
The Dragonfly KK13 drone features Parrot Anafi alike foldable design and it will be available with two types of camera....