This new Eachine QX90C Pro was completely redesigned compared to its predecessor (the QX95). In order to protect the electronic parts, as well as the VTX camera, during crashes, Eachine equipped the QX90C Pro with a cool plastic canopy.
Based on the versatile F3 flight controller, the QX90C Pro drone can be configured with multiple flight modes. While “Angle” mode is suitable for newbie pilots, Acro mod is recommended only for experienced pilots.
According to the manufacturer’s specs, the 600mAh LiPo battery allows up to 5 minutes of flight time. Therefore the “Fly more combo” package with 5 batteries allows almost half-an-hour of continuous fun time.
Eachine QX90C Pro features and specs
- 90mm sized frame with protective canopy;
- Eachine AIO F3 flight controller with built-in BetaFlight OSD;
- Multiple flight modes;
- 8520 Black Edition coreless motors;
- Lady bird 55mm, 2-leaf propellers (black on front, red on rear);
- 600TVL camera with integrated 25mW VTX;
- Buzzer alarm;
- Optional radio receiver (Frsky D8, Flysky or DSM2/DSMX);
- Up to 5 minutes of play time (2.8V end voltage).
Eachine QX90C Pro package content
Eachine announced their QX90C Pro quadcopter in 3 package variants. While the “Basic” edition is advertised for $62.99, the “Standard” version costs $68.99 and the “Fly More Combo” is sold for $86.99. All variants are available with 3 types of radio receiver. According to your existing transmitter you can opt for FrSky, FlySky or DSM2/DSMX receiver.
Included with QX90C Pro Basic:
- 3.7V 600mah LiPo Battery;
- USB battery charger;
- Buzzer
- 1 set of spare propellers;
- Blade removing tool;
- Screwdriver;
- User manual.
Included with QX90C Pro Standard Combo:
- 3 pieces of 3.7V 600mah LiPo Battery;
- USB battery charger;
- Buzzer
- 1 set of spare propellers;
- Blade removing tool;
- Screwdriver;
- User manual.
Included with QX90C Pro Fly More Combo:
- 5 pieces of 3.7V 600mah LiPo Battery;
- Charsoon BC-1S05 multi charger;
- Buzzer;
- 5 sets of spare propellers;
- Spare canopy and camera protector;
- Blade removing tool;
- Screwdriver;
- User manual.
QX90C Pro transmitter compatibility:
- Frsky version is compatible with FrSky Taranis X9D/X9D PLUS (D8 mode), XJT (D8 Mode) and Taranis Q X7 transmitters;
- FlySky version is compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F and Turnigy Evolution transmitters;
- DSM2/DSMX is compatible with Spectrum/JR (DSM2/DSMX protocol) and DEVO10/DEVO 7E (with deviation firmware) remote controllers.
