Like the HGLRC Wind5, GEPRC’s new Mark3 drone will also come with two power options. While “version 1” aka “low-configuration” is optimized for 3-5S batteries, “version 2” aka “high-configuration” is specially designed for 4-6S LiPOs. Excepting the frame, propellers, camera and the rest of the parts (ESC, VTX and motors) are different between the two versions.
In addition to the on-board Caddx Ratel FPV camera, there is room to install a second GoPro Session alike camera. Both, top and bottom plates of the GEPRC Mark3, are padded with anti-slip foam.
GEPRC Mark3-H5 features & specs
- 225mm size 3K carbon fiber frame (H style – True X);
- Two power options SPAN F4 tower, max 5S or SPAN Pro F4 BL32 tower max 6S;
- Suggested battery according to power options: 4S 1300 – 1550mAh or 6S 1050 – 1300mAh;
- BetaFlight v3.5.3 – OMNIBUSF4SD firmware;
- GR2207.5 2400KV (5s) or GR2207.5 1920KV (6s) motors;
- 5 Inch 3-leaf GEP5040 propellers;
- Caddx Ratel 2.1mm camera;
- 5.8G/48CH FPV video transmitter;
- Optional Frsky XM + radio receiver.
Closer look on GEPRC Mark 3 main parts
Mark3 – H5 frame kit details
- Carbon: full 3K carbon fiber Twill;
- CNC: high precision 7075 CNC;
- Motor to motor: 225mm;
- Bottom plate: 3mm;
- Top plate: 1.5mm;
- Side plate: 3mm;
- Reinforce plate: 1.5mm;
- Arms plate: 4mm.
GEPRC Mark3 3-5s version Flight Tower specs
- MCU: STM32F405;
- MPU: MPU6000;
- ESC: 4 x 40A BLHeli – S (Dshot 150/300/600) support 2 – 5S LiPo;
- VTX: 5.8GHz (48 Channel IRC Tramp default UART3) (PIT/25/200/600mW).
GEPRC Mark3 4-6s version Flight Tower specs
- MCU: STM32F405;
- MPU: MPU6000;
- ESC: 4 x 50A BLHeli – 32 (Dshot 150/300/600/1200) support 3 – 6S LiPo;
- VTX: 5.8GHz (48CH IRC Tramp default UART3 ) (PIT/25/100/200/600/ 800mW).
Caddx Ratel camera specs
- 2.1mm lens;
- 1/1.8 inch starlight HDR sensor image sensor;
- 1200TVL horizontal resolution;
- Super WDR ( HDR );
- DNR: 3-DNR;
- Starlight minimal illumination;
- Wide power input: DC 5-40V.
