JJRC H11WH quadcopter with alt hold

JJRC H11WH with WiFi first person view camera

This new JJRC quad was announced few weeks ago simultaneously on many online quadcopter shops. In my opinion, thanks to the newbie orientated features (headless mode and altitude hold) this JJRC H11WH looks just perfect for beginner pilots.

While the design of the H11WH reminds me about another JJRC quad, the X1, the transmitter looks exactly the same as JJRC H20C has. The remote controller is equipped with a phone holder which allows to install your smartphone on the top of the RC in order to display the camera’s live video feed. In order to obtain the best field of view, the tilt angle of the camera’s lens can be adjusted.

The integrated barometric air pressure sensor allows the JJRC H11WH to maintain its flight altitude stable at the desired level.

Although the JJRC H11WH quadcopter is powered by a high capacity 1100 mAh, the flight autonomy is very short, only about 7 minutes.

One of the biggest problem with brushed motors is that are last only about 10-30 flights and needs to be replaced. Luckily, the designers from JJRC found a way in order to allow easy and without soldering replacement. Just remove two screws and you have access to replace the motor.

JJRC H11WH features and specs

• Altitude hold with barometric pressure sensor;
• WiFi FPV camera with HD resolution (2MP);
• Easy motor replacement;
• Headless flight mode;
• One key return to home;
• High capacity 1100 mAh flight battery;
• LED lights for better orientation during night flights;
• 3D aerobatic flips;
• Up to 60 meter control distance;
• About 7 minutes flight time.

Included with the JJRC H11WH quad

• 2.4G transmitter with phone holder;
• 2.0MP WiFi camera;
• 1100 mAh Li-Po battery;
• USB charging cable;
• 1 set of spare propellers;
• 4 pieces of landing legs;
• 1 set of propeller protectors;
• Screw driver and screws;
• H11WH quick start guide.