Similar to the Jumper T-Lite, the new RadioMaster T8 transmitter also features a game-controller style design and it is available with two types of RF modules. While the T8 Pro comes with CC2500 Multi-Protocol module and HALL Sensor gimbals, the cheaper T8 Lite with FrSky compatible single-chip RF module and potentiometer sensor gimbals. Another difference between these two remote controllers is that only the Pro has a modular LCD (128*64p). I think the RadioMaster T8 Pro worth the extra 15 bucks.
Both transmitters feature a built 3.7v 1000mah battery and integrated charging circuit. Through the USB Type-C port, you can use it with drone simulators. Through the micro SD slot, you can upload audio files for voice support.
Currently, the T8 Pro is RadioMaster’s most compact fully OpenTX supported radio controller. It has two shoulder switches on each side and supports up to 16 channels. Its status display can be conveniently folded and even removed.
RadioMaster T8 Pro vs T8 comparison
| RadioMaster T8 Lite | RadioMaster T8 Pro | |
| Gimbal type | Potentiometer sensor gimbal | HALL Sensor gimbal |
| Gimbal face | ABS | CNC |
| Switch nut | Standard | CNC |
| RF module | 8/D16 FCC/LBT | Full CC2500 |
| Battery | Builtin 3.7v 1000mah | Builtin 3.7v 1000mah |
| USB charging | Yes | Yes |
| USB Simulator | Yes | Yes |
| Status LCD | No | Yes |
| SD card slot | Yes | Yes |
| Voice support | Yes | Yes |
| Firmware | Pre-set OpenTX | Full OpenTX |
| Binding | Stick/Bind | OpenTX |
| Max CH number | 8 | 16 |
| Price | $54.99 | $69.99 |
Do these radios support 900mhz modules?
The Radiomaster T8 will support Frsky ACCESS and ACCST?
Can I bind those controllers to my ZLRC SG906 pro 2?
Hi,
I expect to receive a T8 Pro for review, and I will confirm it if can be used with the Beast drone.