As its name suggests, the SG906 Beast EVO Max3 evolved significantly in the last few years. This 2023 edition features an upgraded 3D obstacle avoidance system, a repeater mode communication system, and a 4K camera with a 60Mbps max bit rate.
The drone measures 17.4 x 8.4 x 7cm with folded arms and weighs 577 grams. It is equipped with powerful 1806-type brushless motors and 7″ propellers. According to ZLRC, you can fly confidently in windy conditions (up to level 6). The MAX3 EVO can reach up to 45km/h horizontal flight speed.
Being powered by a 3S 11.4V 3000mAh battery, it has about 30 minutes of flight endurance. Thanks to the fail-safe return to home (RTH) function, the EVO Max3 drone will return autonomously to the take-off point in case of remote controller signal loss or low flight battery voltage.
Price and availability
The ZLRC Beast EVO drone can be ordered from Banggood with one battery for $299.99 or with two batteries for $345.99. This price includes a remote controller, a set of spare propellers, USB cables, and a nice storage bag.
ZLL SG906 MAX3 BEAST EVO: Key features
- Built-in repeater in the remote control for extended range
- Front and rear visual obstacle avoidance function
- Doubles satellite positioning system GPS/GLONASS
- Optical flow positioning mode
- 4K HD adjustable camera
- Mechanical 3-axis brushless motor gimbal
- Digtal image transmission
- Smart flight modes
- Intelligent follow
- Surround flight
- Waypoint flight
- Trajectory pointing flight
- One key course reversal
- Up to 30 minutes of battery life
Hello, I have the same problem as many people here, I can’t register, the flight path is therefore limited to 250m, what’s the nonsense!?
I wanted to install the latest ZLL sg906 app for the drone, but when i do it asks me to register / then its says first month free / didn’t go that far but then next thing it wants is a credit card./ why do i need a credit card to install an app so i can fly my drone/ what’s the deal / please send me as app i can use without the BS / also the obstacle avoidance never worked send me a link can use with no BS
I also have a SG906 beast Max3. Flys really nicely with remote only.
But I can’t get the camera to show on phone (Oppo A78 running android 13).
Mine has a wire connect from phone to controller.
When plugged in the following wording pops up
“Android Aoa interface not installed appsworks with this wb accessary, Learn more about this accessary at http://app.hy-chip.com/hfun_fly-download html.”
When I search for above it comes up with “not found”
Can anyone point me in the right direction??
I just purchased a ZLL SG 906 Max 3 Evo and I want to register my drone but I also need to have a remote ID so I’m contacting you to find out if you can help me with my remote ID. I don’t see anything on the remote so if anyone there could help me out it’ll be much appreciated. Thank you.
Hi, where can I find the manual in PDF format in Italian because the one supplied requires a microscope to read it, I tried to do a search on the web but I can’t find it
FPV flight impossible because camera image freezing on iphone screen. Also camera channels cannot be switched.
What app does this beast 3 use? Does the phone have to be 5g. 4G is not connecting.
In the user manual, you should find a QR code, scan it with your phone this will allow to download and install the APP
good luck!